NEED A FAST ANSWER EMAIL US  -- Thank You.
email  admin@sealersupply.com
Need a TEXTURE on your SEAL Surface ? we have a special Weave PTFE
with surface characteristics for applications where a TEXTURED SURFACE is required.
WITH or WITHOUT adhesive backing
Click on picture for larger view
Lead time 2-3 days plus UPS - Minimum order $200
We can slit any width to MAXIMUM SLIT WIDTH 40" (1/2" wide to 40")
Contact us for Quotes
admin@sealersupply.com

CLICK ON PICTURES FOR LARGER VIEW
Fluorofab TM fabrics are made from woven fiberglass cloth
that has been coated with PTFE resin this product has
excellent strength and dimensional stability. The special
weave has surface characteristics for applications where a
textured surface is required. This texture will appear on a
poly  or mylar bag for instance giving a textured finish seal.
Specifications

100-8 NON Adhesive Backing
Thickness Nominal 8 mil
Excellent release
Low surface friction
Stable from minus 100 F to Plus 500 F Degrees
Chemically Resistant
Highly resistant to cut though and abrasion
Virtually zero flow under heat and pressure
FDA compliant for food processing
Minimum Weight oz/yd2 9.8
Breaking Strength lb/inch of width (Warp direction) 240
Breaking Strength lb/inch of width (Fill direction)  190


100-8S-SW
Thickness Nominal 8 mil
With Silicone Adhesive Backing
Excellent release
Low surface friction
Stable from minus 100 F to Plus 500 F Degrees
Chemically Resistant
Breaking Strength (lbs per inch of width 200
Adhesion oz./inch of width 40
Elongation Percent  less than 5
Dielectric Strength (V/ Mil ) 400
PTFE Made in USA
Made in USA